Vides ietekme uz viedo ar oglekļa nanopildvielām modificētu kompozītu un šķiedru plastikātu fizikālajām īpašībām strukturāliem pielietojumiem / Environmental effects on physical properties of smart composites and FRP modified by carbonaceous nanofillers for structural applications

Permanent URI for this community

https://dspace-dev.lu.lv/handle/7/49027

Browse

Now showing 1 - 3 of 3

Cyclic moisture sorption and its effects on the thermomechanical properties of epoxy and epoxy/MWCNT nanocomposite
(MDPI, 2019-08-23) Glaskova-Kuzmina, Tatjana; Aniskevich, Andrey; Sevcenko, Jevgenijs; Borriello, Anna; Zarrelli, Mauro
The aim of this work was to reveal the moisture absorption–desorption–resorption characteristics of epoxy and epoxy-based nanocomposites filled with different multiwall carbon nanotubes (MWCNTs) by investigating the reversibility of the moisture effect on their thermomechanical properties. Two types of MWCNTs with average diameters of 9.5 and 140 nm were used. For the neat epoxy and nanocomposite samples, the moisture absorption and resorption tests were performed in atmospheres with 47%, 73%, and 91% relative humidity at room temperature. Dynamic mechanical analysis was employed to evaluate the hygrothermal ageing effect for unconditioned and environmentally “aged” samples. It was found that moisture sorption was not fully reversible, and the extent of the irreversibility on thermomechanical properties was different for the epoxy and the nanocomposite. The addition of both types of MWCNTs to the epoxy resin reduced sorption characteristics for all sorption tests, improved the hygrothermal and reduced the swelling rate after the moisture absorption–desorption.
Environmental effects on mechanical, thermophysical and electrical properties of epoxy resin filled with carbon nanofillers
(AIP Publishing, 2019-12-12) Glaskova-Kuzmina, Tatjana; Aniskevich, Andrey; Sevcenko, Jevgenijs; Zotti, Aldobenedetto; Borriello, Anna; Zarrelli, Mauro
The aim of this work was to establish the effect of environmental factors (moisture and temperature) on some mechanical, electrical and thermal properties of epoxy-based composites filled with carbon nanofillers: nanotubes (CNT), nanofibers (CNF) and hybrid nanofiller (nanotubes/nanofibers in the ratio 1:1) and to reveal the most environmentally stable NC. First, the nanocomposites (NC) containing different nanofiller contents were prepared to evaluate electrical percolation threshold and to choose NC at certain electrical conductivity for further characterization of the physical properties in initial state and during/after environmental ageing. The environmental ageing consisted of water absorption at 70 °C until equilibrium moisture content reached all samples in 4 weeks and 2) heating at 70 °C for the same time, and 3) freezing at -20 °C for 8 weeks. Two concurrent factors, temperature and moisture, led to post-curing of all materials studied without significant plastization. Some positive nanofiller effects were found for sorption, mechanical and thermophysical characteristics of RTM6 epoxy resin. Based on experimental results, the most environmentally stable NC was epoxy filled with 0.1 wt. % of CNT/CNF hybrid, which had the lowest effect of temperature and moisture on thermal and electrical conductivities, along with the lowest equilibrium water content and diffusivity.
Hydrothermal Aging of an Epoxy Resin Filled with Carbon Nanofillers
(MDPI, 2020-05-18) Glaskova-Kuzmina, Tatjana; Aniskevich, Andrey; Papanicolaou, George; Portan, Diana; Zotti, Aldobenedetto; Borriello, Anna; Zarrelli, Mauro
The effects of temperature and moisture on flexural and thermomechanical properties of neat and filled epoxy with both multiwall carbon nanotubes (CNT), carbon nanofibers (CNF), and their hybrid components were investigated. Two regimes of environmental aging were applied: Water absorption at 70 °C until equilibrium moisture content and thermal heating at 70 °C for the same time period. Three-point bending and dynamic mechanical tests were carried out for all samples before and after conditioning. The property prediction model (PPM) was successfully applied for the prediction of the modulus of elasticity in bending of manufactured specimens subjected to both water absorption and thermal aging. It was experimentally confirmed that, due to addition of carbon nanofillers to the epoxy resin, the sorption, flexural, and thermomechanical characteristics were slightly improved compared to the neat system. Considering experimental and theoretical results, most of the epoxy composites filled with hybrid carbon nanofiller revealed the lowest effect of temperature and moisture on material properties, along with the lowest sorption characteristics.

Browse

Results Per Page

Sort Options